What is paver sealing? How does it work?

Paver sealing

Pavers are superb for patio surfaces, walkways, and many other applications. They offer enormous options when choosing colors and textures. Paver sealing is essential to help preserve the beauty and durability of the pavers for many years to come.

 

  • Why Sealing: 

Sealing is essential because it protects against stains, dirt. And other influences that can damage or discolor a paving stone over time. It helps to seal in. These substances rather than soak into the stone’s pores, which would be much more difficult if not impossible to remove later on when it happens again. To get the benefits of the latest designs and technology, AAA Paver Sealing of Orlando will be the right option for you.

 

  • How it Works: 

When pavers are install, they must be sealed as part of the installation. Sealing is accomplish by creating a coating on the stone’s surface in a much more permanent way. This coating creates an additional layer between the paving stones and any substances that may affect them.

 

Sealing pavers regularly to protect them and keep them in good condition so that they do not get damage or discolor in any way. Pavements need to be sealed every three years, but this varies depending on how many people walk or drive on them, how often they get wet from rain or snow runoff, and how exposed they are to the sun, wind, etc.

 

  • Proper Steps to Do It:

People with any paving stone can use various paver-sealing products on the market. Some are easier to apply, but all will seal the stones from harmful substances that may penetrate through the pores.

 

The first step is to remove any debris and debris that might adhere to the pavers after they have been install and become discolor by exposure to water, dirt, and other elements. There are many different settings available depending on how thick of a coat you wish to apply and if you need an additional wax or stain used after it dries. Some sealers are very thin and go on almost like a liquid, while others come in a thicker formula.

 

  • Applying the Sealer: 

The best way to apply the sealer is with a paint roller or a sprayer dependes on how thick. Or thin the sealer is apply. Using a roller, it is best to start on one side of the patio and roll back. And forth across the pavers until you have covered them all. If you use a sprayer, it generally involves just spraying an even coat over all of the bricks. Note that some products only need to be applied once. While others need two coats for maximum sealing protection.

 

After it has dried, you will need to use a cleaner made specifically for sealing to remove any extra residue over the pavers. You will then need to wait 24 hours before staining or waxing the pavers. So that it does not affect how much stain or wax gets applied in later steps. Be sure not to use any pressure washer when cleaning the pavers. As this can easily damage them or even turn your pavers back into sand if you are not careful.

 

Conclusion:

It helps to prevent any stains from occurring later on and prevents dirt from getting into the pores. And helps keep pavers in good condition for many years. The process is not complex except for sanding or staining. This should be done about every six months, depending on how often you put them in contact with water.

Leave a Reply

Your email address will not be published. Required fields are marked *