What Are The Parts Of A Western Saddle?
Below are the parts of a Western saddle shown on two illustrated photos.
The The first picture shows the parts of the saddle while it is mounted on a standing saddle. Some parts may be difficult to see so we took the second image showing some of the same parts when the saddle was on a horse.
Read More: saddle part names
The photos are accompanied by a brief description about each saddle part.
You might also like: How To Measure a Western Saddle Seat and What Are Saddle Rigging Positions?
Image #1: The parts of a Western saddle.
Image #2. These are the same parts as the saddle shown above but they are easier to see in this image. The breast collar and front cinch are also shown, but they weren’t in the original photo.
Descriptions Of The Parts Of A Western Saddle
Below is a brief description of the parts of a Western saddle. They run from the top of a saddle to its bottom.
- Fork / Swells/ Pommel – You can see that this area has many names. In a Western saddle this area is commonly referred to as the fork or swells, and is occasionally referred to as the thegoneapp.com an English saddle this area is usually exclusively referred to as the pommel.
- Horn – The horn (aka “saddle horn”) might be the most recognized part of a Western saddle. A saddle horn’s best known purpose is to secure one end of a rope while the other end is on a cow, calf, or whatever it is the rider has thegoneapp.comle horns are useful for other things, too: For example, they’re handy to use when mounting or dismounting, and they’re a great place to hang pommel saddle bags.
- Seat – The place where the rider is seated when they are riding.
- Cantle – The back of the seat.
- Latigo Keeper: This tab has a horizontal slit. It holds the extra length of the latigo on a saddled horse. This is illustrated in image 2.
- The latigo – This strap is made from leather or nylon and secures the front cinch to the thegoneapp.com photo #1. Unfortunately, the latigo is folded up making it difficult to see. The reason is that this image shows a new saddle, which has never been mounted on a thegoneapp.com. You can see the latigo in image 2.
See also: Number Names 1 to 100
From Etsy. Continue the article below.
- Seat Jockey / Back Jockey – The jockeys cover parts of the saddle beneath them that would otherwise be exposed. Some saddles, such as barrel racing saddles, do not have a back jockey. This is often an option to reduce the weight of thegoneapp.com jockeys.
- Skirt – The skirt (aka “saddle skirt”) is attached to the saddle tree and extends down the side of the horse. The The skirt’s underside is lined with sheepskin, real or imitation.
- Stirrup Fender – The stirrup fender (sometimes just called the “fender”) attaches to the saddle at the top and holds the stirrup at the bottom.
- Stirrup Hobble- This strap wraps around the bottom end of the stirrup.com. Although it looks like a simple saddle part, the stirrup can move freely along the entire length of the fender without being in the correct place.
- Stirrup is where the rider places his or her foot during riding.
- Maker’s Mark- This is an identifying mark used by saddle makers to identify the saddle they have on thegoneapp.com. However, not all saddles have this mark. A maker’s mark can be found in the stirrup footer, the latigo keeper, and/or the stirrup heel. A Maker’s marks can be placed anywhere, or in multiple places, as the maker decides.
- Front Cinch – The front cinch goes underneath the horse at the front of the saddle. It attaches to the saddle on the “offside” (or right side) with a strap known as a “billet” (not shown). It attaches to the saddle with the latigo on the left.
- Back Billet/Flank Billet: This strap runs down the sides and ends at the horse’s back. When the saddle is on the horse, it is attached to the back buckle.
- Back Cinch / Flank Cinch – The back cinch goes underneath the horse at the back of the saddle. It is fastened to the saddle by the back thegoneapp.com cinch. This keeps the saddle’s back close to the horse’s head when riding or roping on uneven ground.
- It is not labeled – Image #2 shows a small strap that connects to the back cinch and the front cinch. It’s also known as the Cinch connector strap, the hobble strap (not confused with the stirrup hoop), thegoneapp.com, or simply the connecting strap. Although it is small, it is an essential part of any saddle. Without the small connecting strap, the back cinch might slide back too much. This could mean that the back cinch may not be able to do its job properly. At its worst, this could lead to horses bucking or spooking.
- Breast Collar – Technically speaking, a breast col is not part of a saddle. It’s an accessory that is often used in conjunction with a saddle and we are mentioning it here.A The breast collar attaches to the front of a saddle. It can be attached in many ways and at different locations. The main function of the breast collar is to prevent the saddle from sliding backwards. However, it can be used to help keep the saddle on the horse upright if the horse starts to tip to one side.