The Only Motorcycle – All Parts – Name List You Will Ever Need. You may live for riding your motorcycle, but only possess a rudimentary knowledge of its parts. Although you don’t need to be a mechanic, it is important that you know some basics about each part so you can make informed decisions when replacing them.
It would take years to research every component of a motorcycle. However, this comprehensive motorcycle – all parts – namelist will help you identify the most critical parts and provide information in case you need them to be replaced or upgraded.
The frame is essentially the foundation of a motorcycle; virtually all motorcycle parts and functions are built on and around it. Without this crucial part, there would be no motorcycle.
Some frames come as a single piece while others are made up of two parts. The frame is made up of many parts, including the head tube and frontfork. It can be made of steel, welded aluminum or alloy struts. The Rear suspension plays a major role in the design.
The function of the engine is obvious; it powers your bike. While most motorcycle engines use either a two-stroke, four-stroke, or internal combustion engine, there are other options such as electric motors or Wankels. There are several different types of engines, the most common are: V-twin, inline two-cylinder, or inline four-cylinder:
- V-twin – A two-cylinder piston engine with cylinders arranged in a V configuration, most common in Harley Davidson and Japanese cruisers alike.
- Two cylinders arranged side by side in parallel two-cylinder. This is the most common type of engine found on touring bikes.
- Inline four-cylinder – The beefier brother to the inline two-cylinder, most common in larger European bikes.
The engine creates a significant amount of power that must be transferred to the wheels smoothly and with little disturbance to passengers. The Transmission incorporates many components, including the clutch and gearset. The There are two types of transmission drives: shaft drive and chain/belt. A lot of Harleys have chain/belt drives, while European and Japanese models use shaft drives.
Each exhaust system on a motorcycle consists of exhaust pipes and baffles. The exhaust system displaces harmful combustion gases away from riders. Your engine’s performance is also improved by this system. Baffles are found in the pipes. They reduce noise. All All of these factors make exhaust one of the most important parts of a motorcycle.
Motorcycle riders need a way to stop the forward motion of their bike. These brakes serve their purpose. They are essential for any motorcycle, all parts included. There are typically two brakes on each motorcycle: one for the front wheel and one for the rear. The In older bikes, rear brakes may be equipped with a drum or rotor. Some models have linked rear and front brakes, which riders can control simultaneously with a single control. The A bike’s front brake has about two-thirds of its stopping power. For heavier touring bikes or single rotor, some front brakes have a dual rotor.
A faltering ignition switch can cause your motorcycle to fail in its attempt to start. The The switch controls the power engine, starter motor, and ignition controls.
When learning about the parts of a motorcycle, wheels or rims are perhaps the most widely recognized and well-known part. You are already aware that wheels serve two main purposes: They provide structural support and give motorcycles a way to move.
The wheels are designed to withstand both radial or axial forces. This careful design prevents your bike’s tipping or rolling while you travel at high speeds and take whipping turns.
Motorcycle The wheels can be made of steel/aluminum, cast iron, or a combination of both. The steel/aluminum version includes steel spokes with steel or aluminum wheels. Cast iron wheels are made from aluminum-alloy, carbon fiber, and a magnesium content alloy.
There are two types of rims: spoke rims or solid rims. The spokes and rim of the second design are made as one unit. Spoke rims, also known as laced motorcycle wheels, are made from resilient aluminum. They have a classic look and are often called laced motorcycle wheels. The American-made, aircraft grade, 6061 T6 billet aluminum is the best material for either type. Avoid cheaply produced steel from China.
Tires are another critical item on any motorcycle – all parts – name list. The The rims are connected to the outer part of the wheels, also known as motorcycle tires. These tires have multiple functions. They allow the motorcycle to turn and provide traction. They also absorb irregularities on the road surface and resist wear. The The contact patch of a tire is the most crucial part. It is the area that comes into contact with the road.
The The majority of tires are pneumatically inflated, although some are filled using a non-puncturable tire mousse. They are made of rubber with treads that enable them to hold the road in any conditions. For increased torque, fat rear tires can be fitted and the front tires can provide a more comfortable ride.
The suspension shields passengers from disturbances such as bumps, vibrations and noise generated by the road.
When learning about the components of a motorcycle it is important that you note that there are two types of suspension: the front and rear. The Front suspensions are equipped with two fork tubes. Rear suspensions include a swingarm and one or more shock absorbers.
The suspension consists of the spring and damper. The The spring holds the passengers’ weight and absorbs any disturbances. The The compression of spring is dampened by a damper. This prevents passengers from bouncing around. Riders can also stabilize their experience by using lower kits. These kits create a lower center-of-gravity. Basically, the spring manages the bike’s mass and the damper controls the spring’s speed.
Motorcycles are equipped with fenders to prevent the tires from throwing road spray like rocks, sand, mud and liquids into the air and hitting your passengers and yourself, other motorists and other vehicles nearby. This is a serious risk as loose objects could get stuck in the tires’ tread grooves while they roll over the ground. These objects can be ejected from the tire’s surface at high speed at pedestrians, motorists and vehicles as the tires roll.
Fenders are rigid, and they frame the wheel well. They protect you and anyone else on the road from any objects ejected. Riders who want larger wheels can use fender kits and spacers.
When it comes to handling your motorcycle, the front fork is essential. It connects the motorcycle’s front wheel and axle to its frame, holding the front wheel and providing the ability to steer the bike.
The front fork’s setup is mildly complex, consisting of the following:
- A triple tree that connects the handlebars and fork tube to the frame with a pivot
- Two fork tubes that hold the front wheel axle
The majority of front forks incorporate the front brake and front suspension, allowing the front wheel to rotate around the steering axis.
Rake is defined as the angle between front forks, ground or head tube, and ground. The Triple-trees are used on the majority of stock bikes to hold the forks parallel with the head tube. This creates a frame rake that is equal for the bike and the frame. Modifying the frame, triple tree or both can alter the bike’s handling by altering its trail. These are usually done with a set of keel kits.
Rear Shock Absorber
The rear shock absorber serves dual purposes: It uses damping to control up-and-down oscillations of the suspension and supports the weight of the rear of the motorcycle by utilizing a spring that softens bumps. This is why the rear shock absorber is so important in suspension.
This important part facilitates the transfer of power from the motorcycle engine to the transmission and the rear wheel. Simply put, the clutch acts as the intermediary between the engine’s transmission and the engine.
Jet Kit or ECM power commander (chip)
You can reconfigure your carburetor’s or fuel injector’s fuel delivery with a jet kit or ECM power commander. This kit allows you to reconfigure your motorcycle for various purposes, including installing an aftermarket exhaust and airbox or correcting any other issues.
Safety features should be included on every motorcycle – all parts – name list. In addition to illuminating the route ahead during hours of darkness, the headlight on your motorcycle also makes your bike more visible to other drivers at any time of the day or night. A headlight can be seen by drivers well before they can see the motorcycle or its riders.
Air Cleaner or Air Intake
One of the safety features on motorcycles is the air cleaner. The air cleaner filters out impurities from the incoming air, protecting the engine oil against contamination and the pistons, cylinders, and bearings from damage and scoring. The turbo or forced air is the preferred method of operation for air cleaners. You There are three options: an aftermarket air filter element or assembly, and a velocity stack.
The gas tank in motorcycles serves the same purpose as it does in automobiles: it holds and dispenses gasoline the bike needs to run. Nearly all motorcycles only have one gas tank. The A motorcycle with one tank of gas will typically get between 120 and 200 miles depending on how it is used, its riding conditions, and the size and type of the engine.
Just like in a car, the odometer on a motorcycle measures the distance in miles that it has traveled. You can have an electronic, mechanical or hybrid odometer.
Most sets of handlebars will fit any motorcycle. Modifying your handlebars is one of the most cost-effective and easy ways to enhance the look and comfort of your bike. Aftermarket handlebars can make a huge difference in this regard. Factory handlebars are designed to be installed according to a set of measurements. The different types of handlebars include the following:
- Zero drag, low drag or high drag
- Ape Hangers
This small but mighty part helps riders keep their feet planted and in control during even the most challenging rides. The Foot pegs can be used for passenger, engine guards and highway.
Highway Bars/Crash Bars
These bars protect both the motorcycle and riders. Crash bars are also known as highway bars. They can be used to prevent contact with the engine and sides of the bike when the motorcycle is in an accident. They also safeguard riders’ legs. The The most common materials used to make crash bars are aluminum, mild steel, and stainless steel.
Some riders prefer to extend their legs further than factory assemblies allow. Forward controls are a modification that places the brake pedal, shift peg and foot pegs forward.
Fulfilling All Of Your Parts Needs
Regardless of your motorcycle parts and functions needs, you can get many of the motorcycle parts on our list through Flex Pay, a better way to pay than traditional financing, credit cards and layaways.
The We work with the top manufacturers – American Suspension and Fat Katz, SMT Machining, Bad Dad, and SMT Machining – who are all the best. The They can supply parts such as custom rims, fenders and rear shock absorbers.
The application process for Flex Pay is simple. There are no credit checks, and as long as you earn an income, chances are you will get approved. You You can begin the EZ 1-2-3 process today by filling out our 5-minute, secure online application.
Once you are approved, you will be notified within 24 to 48 hrs. Then you can begin shopping for the parts that you need to fix or upgrade your bike.