What is Audio Clipping: Examples, Causes, & the Easy Fix


audio clipping

Whether during recording or playback, you’ve been around someone that sees the little red light go off or light up permanently who then says “Oh, dude, you’re clipping.” But do they even know what audio clipping is?

What Clipping is a problem. What can we do to stop clipping? Is it the same as peaking (yes)? I will explain what it is, how to fix it, and give you a description of the sound.

Read More: how to fix peaking audio

It’s important if you want to get the full enjoyment and experience out of any music, TV, or movies you’re trying to enjoy. Audio peaking can cause damage to your expensive entertainment system, headphones and studio monitor speakers. Let’s fix this problem ASAP.

What is Audio Clipping audio?

Clipping audio is when an audio signal is amplified past the maximum allowed limit, whether in a digital or analog system. This is called ‘overdrive’ and just like the guitar pedals with the same name, it leads to distortion and a lowering of audio quality.

clipped signal with distortion
Notice in this clipping waveform how the loudest peaks and troughs are literally clipped off and made flat.

It’s called clipping because that’s what the clipping waveform ends up looking like. A smooth, rounded sine wave has its peaks and troughs ‘clipped off,’ resulting in the flat plateau of a square wave. When this plateau is played back in your loudspeaker, it’s an unnatural and jarring event that sounds horrible and can even lead to blown speakers.

What Does Audio Clipping Sound Like?

Clipping is the phenomenon that causes the sound of distortion. You hear distortion in rock and heavy metal guitars all of the time, but that’s done purposefully and tastefully. We actually have terms in the music industry for the three levels of distortion:

  • Overdrive
  • Distortion
  • Fuzz

All three levels are noticeable, but they’re really obvious in the 2nd and 3rd levels. Overdrive is the lightest amount of distortion and can even be unnoticeable. Distortion is when you start to notice the audio is ‘breaking up’ and losing quality.

See also  How to Fix Warped Wood – The Best Methods for Unwarping Wood

Fuzz sounds like a lot of bees trying to escape from a plastic bag. The difference between a purposefully distorted guitar versus accidental clipping is that it affects the entire audio track and sounds horrible.

the visual results of distortion and audio peaking and clipping

The picture above is the visual, graphical version of the results of distortion. You lose detail and resolution, and things stop sounding clear and sharp, while you also end up with unwanted noise, hiss, clicks, pops, and other sounds that aren’t in the original audio.

Why Do We Care About Audio Clipping?

There are many types of audio clipping. But there is also a range of severity. Clipping audio is a feature of almost every audio piece that has been professionally recorded, mixed and mastered.

This is because even though it may not be noticeable, you can have some peaking to give you more headroom’ and allow for a louder source of audio. You will hear the peaking audio if you have a lot of it. Sometimes it can cause damage to your hearing aids.

Top Useful: What Do You Do If A Screw Hole Is Too Big?

If you hear severe clipping, you will know. It sounds like the audio is starting to ‘break up,’ which is light distortion. The more severe it is, the more distorted the music begins to sound until it can become unrecognizable in an ocean of noise and loudness.

The reason we care, beyond it sounding bad, is that our speakers have physical components that react to the audio signal. In electronics, volume is directly associated with the amount of voltage you’re sending through, and higher voltage means higher temperatures.

If you allow your speakers to clip long enough, they can experience overheating and damage to the coils. Because the woofers vibrate to reproduce sound, the clipped off portions can cause a jarring movement that can ultimately rip the fabric of the cone or tear it away from the sides.

Why Does Audio Clipping Occur?

Clipping can occur at any part of the audio signal path. With analog clipping, you can peak at the microphone, the preamplifier, the analog-to-digital converters, digitally in your computer, at the amplifier, and at the speakers. With digital clipping that can be at the converters, a plugin, any software, or the master output. Every piece of equipment has the ability to be over-driven.

This is because each piece of equipment has a correct volume range it is meant to operate in. Peaking can occur if you make it too loud at any one stage. This is why you find so many volume knobs and gain knobs when you’re working with audio. You’re meant to adjust the volume to the right levels at each stage.

See also  How To Fix Curtains That Are Too Long? 2 DIY Ideas!
how the three different decibel scales interact with the noise floor and clipping music when you have a hot signal with too much amplitude
Sound On Sound created an image to show you the general equivalencies

This gets confusing due to the three different scales used but we have to mention them to fully understand the topic. Decibels is abbreviated as dB. These scales are:

  • dBFS (decibels full scale, digital)
  • dBu (decibels unloaded, analog)
  • VU (voltage units, electrical)

For instance, analog equipment has a maximum voltage it can handle, described as +24 dBu or 20 VU, and moving toward zero and then into the negative as you get quieter. Anything past this maximum is literally clipped off. In digital systems this maximum number is 0 dBFS until the bits of each sample are completely full of information (called ‘saturation’).

digital clipping can occur in any channel or plugin or the master output
You can experience clipping when mixing and recording digitally. Each stage must be balanced correctly.

The correct levels that each piece of equipment is designed to handle is around +4 dBu, 0 VU, and -18 dBFS. So the reason audio clipping occurs is because somewhere along the line, the amplitude (volume) of the audio is higher than those allowed limits and is peaking.

How can we prevent sound clipping?

The main thing to understand is that once you have clipping audio at any early stage of your playback chain, it will sound distorted in any future part no matter if you set the correct levels or not.

An example of this is the popular VLC software for playing music and movies on the computer. It allows you to turn up the volume to 200% and higher. You can set your speakers to be very quiet and then turn up the volume in VLC extremely high and have clipping audio coming out of your speakers at very low volumes.

gain vs. volume in audio clipping

This is called gain staging and is how you stop clipping and make sure it never happens again. Gain vs. Volume are two different things. I recommend reading both articles for a deeper dive. Otherwise I have the simple explanations below.

How to Stop Audio Peaking When It’s Too Late

See also: Solution: How to quickly fix Grainy Videos?

So the first question is, what can we do once it’s too late like this? This won’t be relevant to anyone not involved in the music industry or setting up a church sound system, but you’ll be happy to know that loudspeakers have protective circuits in them that cause the signal to ‘soft clip’ instead of ‘hard limit.’

Soft clipping removes the sharp plateau that is caused by clipping, and smoothens it so it has a more even shape. This protects your speakers from overly unnatural movements that cause the tearing of the cones, but they can still suffer heat damage if the distortion is allowed to continue for prolonged amounts of time.

See also  VDC Light – Meaning & Causes (How to Fix it)

A limiter is a device that prevents peaking by dynamic range compression on your amplifier, digital audio workstation software or mixing console. You will still have clipping audio, but the voltage won’t be higher than the acceptable limits. This will result in horrible audio.

A compressor can be used to reduce volume without limiting. This will give you a more pleasant sound and protects against clipping. A compressor and limiter are two common tools used by professional studio engineers. You may be asking what is a compressor and what is a limiter, in which case those links have you covered.

How to Stop Clipping Distortion at the Source

If you’re listening to television, movies, video games, or professionally released music, the source levels of audio will be high but won’t be so high as to cause sound clipping. Normalization will be applied to them, increasing their volume as much as possible while avoiding peaking.

Any software settings should be set at 100% or lower, but not higher. If you need more volume then you should turn up the volume at your speakers or headphones.

This is true whether you are playing guitar, keyboards, or recording with a mic. If you’re dealing with clipping in music, you should first turn down the gain at the instrument or preamplifier for the microphone. This will ensure that you are not sending too much signal to your amplifier, analog-to-digital convertor, or other devices.

the procedure to ensure you won

The point is to make sure your source audio itself isn’t a hot signal that’s peaking. Then you move to the next piece of equipment and make sure its volume knob isn’t set too high. Follow this procedure all the way up through your receiver or amplifier and to your speakers. This can be used for studio recording and music clipping at venues.

Finally, typically with amplifiers (usually in the automotive audio) you can under-power or over-power your speakers. You should make sure that your speakers match the amp’s power rating. Your speakers can be damaged by being too loud.

That’s Audio Clipping Defined, Explained, & Prevented

The basic cause of peaking is that somewhere along the line leading to your speakers or headphones, the audio signal has become too hot. That means it’s either too high in voltage (amplitude / volume) or it’s maxing out the bits at any digital stage.

You don’t need to know the technical details or be an electrical engineer to understand the basics or to fix it, though we provide that info above, too. Anything you need to know about audio clipping is here for you whenever you need it.

See also: 5 Common Glass Shower Door Repairs

Leave a Reply

Your email address will not be published. Required fields are marked *