How To Fix Blotchy Gel Stain (3 Steps Solution)

Gel stains are hard to handle on wood indeed. They dry quickly after application. They can get blotchy on the wood pieces more quickly.

So, do you badly need some solution on how to fix blotchy wood stain?

Read More: how to fix blotchy gel stain

Here, mineral spirits and lacquer thinner may be of assistance. They can be used to remove the gel stain. We can then reapply the gel. However, it is important to follow these steps carefully and be safe. There are also ways to prevent blotting.

The whole process is fascinating. You can also get tips on how to avoid it, which is a cherry on top!

Just take a moment to read the following!

“Unblotch” The Gel Stain From Your Wood In 3 Steps

how to fix blotchy gel stain

Oh no! Is the gel stain all blotchy now? It’s alright. Gel Stains are difficult to work with.

Now, let’s delve into how we can fix it! It’s not that hard. Be sure to take precautions. The gel stain must still be wet while you’re at it.

Materials You’d Need

The main thing that we’ll do first: remove the gel stain. We’ll do it with the help of an appropriate solvent.

You can use either mineral spirit or lacquer thinner. Both are good, but they can be highly corrosive or flammable. It is important to take precautions.

The sanding time will be reduced if you use lacquer thinner. However, mineral spirits require a longer time to sand before wiping.

We recommend that you buy both before you start. This will allow us to test which one is faster for the blotch. If mineral spirits don’t work well, lacquer thinner sure will. It may also strip the whole thing.

See also: Hyper-blog

However, if you’re looking for the right product, here are some of the best ones:

Before we get straight down to the steps, let’s list down the materials that we’ll need.

  • 100 to 220 grit sander
  • Mineral spirits or lacquer thinner
  • Rag
  • Nitrile gloves (Nitrile gloves resist chemicals while latex gloves not so much. So, be sure to get the nitrile gloves)
  • Respirator
  • KN95 mask
  • Lab Coat
  • Safety goggles

Now that we know which materials to gather, let’s get straight to business!

Step 1 of 3: Prepare The Workplace

Sit in a well-ventilated room with all the materials. You should ensure that the temperature in the room is not too hot or too cool. This is because the solvents shouldn’t gather in the room.

The room temperature also has an impact on the consistency and color of the stain. So, it’s important to maintain that.

Step 2 of 3: Sand Your Wood

Start with sanding at low grit of 100 to 120 of your choice. Gradually increase your grit to 220.

If you’re using mineral spirit, get around 30% of the gel stain off by sanding. If you’re using lacquer thinner, sand it just enough to make the surface rough.

This is what the lacquer thinner will adhere to. The thinner can handle the rest.

Step 3 of 3: Wipe The Gel Stain Off

Take a rag. Use the solvent you prefer to soak it. Start scrubbing.

Use sufficient pressure when you scrub. This will also affect how quickly the blotch is removed. You can do this step with several wipes.

To remove the stain, wipe the entire surface. Next, wipe the stain with the second towel. You can use as many wipes to remove the stain as you need.

It is important to remove the stain quickly and completely between each wipe. Don’t let it stand to dry in between the wipes. Let it dry after the last wipe. Next, prepare the wood to reapply the stain.

Reading: PS4 Fan Loud: Here’s Why & How To Fix The Noise [Solved]

And that’s it! It’s as easy as that!

How To Prevent The Gel Stain From Blotching

Gel stains dry off incredibly fast, right? And if it dries while applying, that’s when it creates the blotches. How can we avoid this?

Tip 1: Brushing Over An Appropriate Solvent

First, brush some mineral spirit or turpentine on the wood after sanding. Turpentine is sometimes more preferred because it increases the “open time” of the stain more. You could also mix some turpentine with the stain. This will make it less sticky.

A wash coat of shellac can also be used before staining the surface again after sanding. This works well, too.

Tip 2: Preparing The Wood Surface

Make sure the wood surface is completely dry. It shouldn’t have any oil on it before staining.

If the stain has not dried off yet, you’re safe. You should get to work as soon as possible! It’s really not that hard, right?

Frequently Asked Questions

Question: How do you fix blotchy gel stain?

Answer: The whole stain must be removed by either stripping or sanding. You can use mineral spirits, lacquer thinner, or sandpaper to remove the stain. Before applying solvents, sand the area a bit. You should also take precautions.

Question: Can mineral spirits be used to remove dried stain?

Answer: It is possible to darken gel stain after it has dried. Unfortunately, you cannot lighten it or remove it. Mineral spirits can be used for lightening or removing it. It must be done while the stain remains wet.

Question: What happens if there is too much stain?

Answer: The stain might just be removed completely. It is possible that the gel that penetrated into wood will remain. If all gel stains are not removed after wiping, it could be that the wood wasn’t sanded well enough. Sanding is crucial for stain adhesion.

Wrapping Up

So, are you relieved now that you know how to remove blotchy gel stain?

We hope these pro-tips will help you avoid getting it all blotchy again.

We’d love to hear about your experience! Happy “Unblotching”!

Top Useful: Removing Algae in Your Salt Water Pool

Leave a Reply

Your email address will not be published. Required fields are marked *