How To Disable Laptop Keyboard 2021: Top Full Guide

How To Disable Laptop Keyboard 2021 Top Full Guide

This article will answer the question of how to disable laptop keyboard quickly and easily. Apart from that, here Program is the best option when you have trouble concerning a laptop.

Nonetheless, as well as the ways below, we advise that you not attempt to employ different methods without entirely understanding. Because if you make a tiny mistake, it is possible to damage the computer keyboard at any moment. Adhere to the guide to observe the most precious ways!

The Way How To Disable Laptop Keyboard In Windows 10

The Way How To Disable Laptop Keyboard In Windows 10

1. Open the Device Manager by tapping on the Windows key, and then type “Device Manager” to the search and click the first outcome.

2. Scroll down till you locate that the “Keyboards” section, and then click to enlarge it.

3. Click on the keyboard that you would like to disable, then click on it to show a list of alternatives.

4. Click the “Disable” to disable the computer keyboard. If you do not have this choice, you need to click “Uninstall” instead. The two will disable your computer keyboard.

5. If requested to confirm that you need to disable or disable the keyboard, click “Yes” from the pop-up that looks. You could also be asked to restart your computer. Your keyboard will then be disabled.

To re-enable the computer keyboard, return to the Device Manager, right-click on your computer, and then click “Enable” or “Install.”

Other Approaches: Cease the Keyboard From Installing With Group Policy Editor

If you can not disable the laptop computer keyboard, turn onto a device installment restriction utilizing the built-in Local Group Policy Editor to manually halt the computer keyboard from reinstalling whenever your computer starts up.

To do so, identify the computer keyboard’s hardware ID, so you’re simply dealing with this one device. After that, let the regional Group Policy Editor stop Windows from installing anything that matches that ID.

Notice: The local group policy editor is currently only available with Windows Guru and Windows Enterprise.

1. Press Win+X and then select Device Manager.

2. Expand Keyboards.

3. Right-click Standard PS/2 Keyboard and select Properties.

4. Proceed to the Details tab and change the Home drop-down alternative into Hardware Ids.

5. Open the Run dialog box (Win+R) and enter gpedit.msc from the control line.

6. Under Computer Configuration, navigate to Administrative Templates > System > Device Setup > Device Installation Limitations.

7. Right-click Avoid installation of apparatus that fit one or more one of these apparatus instance IDs and choose Edit.

8. Select Enabled from the upper-left section of the Prevent installation of apparatus that fit one or more one of these apparatus instance ID’s window, then choose Show from the region below it.

9. Return to where you’re at the Device Manager in Step 4. Right-click the very first entry from the record and select Copy.

10. Return to the coverage you’ve opened in Step 8, then double-click the distance under Value, then paste (Ctrl+V) the replicated ID inside that box.

11. Choose OK on this display, then OK on the coverage display.

12. Locate the apparatus again in Device Manager, right-click it, and then select Uninstall device. Accept any drives which appear.

13. Restart your computer to disable the notebook keyboard permanently.

If the computer still works, repeat steps 9 and 10 with almost any other hardware IDs recorded. There is a risk that the one that you used did not take. If that’s the scenario, add each ID in the listing to be specific.

To reverse this technique, turn the computer on, go back to the group policy editor, and set the policy to Not Configured. A reboot will subsequently re-enable the notebook keyboard.

Watching video:

More Way: Use the Wrong Driver to Break the Keyboard

Updating a device with an incompatible driver is unorthodox and should usually be prevented. But, it is a workable alternative in this example. When you put in an incompatible driver to get a computer keyboard, it stops working.

Notice: If the same driver controls the notebook’s touchpad and keyboard, you will drop the performance of both and possess a mouse or USB keyboard easy to be secure.

Caution: This method can make a BSOD or additional troubles. Only perform these steps if disabling the keyboard is crucial, and you attempted the harmful techniques over. Another choice is to plug into a USB keyboard and use that one instead.

1. Open Device Manager, expand Keyboards, right-click Standard PS/2 Keyboard, and choose Update driver.

2. Select Browse my personal computer for the driver program.

3. Select Allow me to select the list of drivers onto my PC.

4. Clear the Display compatible hardware test box.

5. Scroll through and pick a maker (different from your typical computer keyboard ), pick a version, and select Next.

6. Select Yes.

7. Select Close after the driver is upgraded.

8. Select Yes to restart the pc.

9. When the computer reboots, the built-in keypad will no longer operate.

If you would like to re-enable the computer keyboard, repeat steps 1 and 2 but select to search mechanically for drivers rather.

Read more: https://softwarekeep.com/help-center/how-to-fix-your-keyboard-not-working-in-windows-10

The Way to DISABLE KEYBOARD ON MAC?

Apple’s MacBook is the best notebook out there in the industry. However, if you would like to clean your MacBook’s computer keyboard and you would like to disable it. There is a way to disable it as well.

It’s a catchy but easy method to disable the MacBook computer keyboard by using only terminal controls. There are also applications available that will permit you to disable the computer keyboard on MacBook.

USING TERMINAL TO DISABLE MACBOOK KEYBOARD

The Terminal is similar to CMD in Windows, which will permit you to control your macOS surroundings in a programmer manner. You can disable the MacBook computer keyboard by simply pasting some controls on your terminal port.

Here we proceed with the control.

sudo kextunload /System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/

Place the password when it asks for the password, along your computer keyboard will be disabled.

If you would like to permit the computer keyboard on your MacBook again, then follow this code.

sudo kextload /System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext

Conclusion

Well, there are a whole lot of alternatives available once you wish to disable the notebook computer keyboard. However, for Windows, we discovered the Device Manager to be the easiest and safest.

This is very much a permanent change, so there is yet another critical step to consider if you may want to re-activate the computer keyboard at any location in the long run.

Now, it is a fantastic idea to return to gpedit.msc and revert the switch so you will have the ability to install the driver in the future if you so desire.

Maybe You Need:

Leave a Reply

Your email address will not be published. Required fields are marked *